GenieMat® FFNP

ACOUSTIC UNDERLAY

Pliteq GenieMat FFNP Roll

What is GenieMat® FFNP?

GenieMat FFNP is a flat, resilient, under screed acoustic underlay made from recycled car tyres. It is predominantly used to meet the impact sound insulation performance standards for floors set out in Approved Document F5 (Part F5) of the Building Code of Australia.

When this acoustic underlay is installed in conjunction with GenieMat PMI perimeter isolation it provides a low-risk, high-performance solution to meeting Part F5 of the Building Regulations.

Robust reduced sound transmission mat made from 94% recycled content. Designed to reduce the transmission of impact sound generated by footfall noise for various types of structures for both residential and commercial use.

Compatible to use directly under various floor finishes such an vinyl, tiles, and wood or to use directly under screed or gypsum concrete in concrete, steel and wood construction.

Which buildings can I use
GenieMat FFNP in?

GenieMat FFNP acoustic underlay can also be used any building types where a screed or floor finish has been specified and Building Regulation compliance or other acoustic criteria have been stipulated.

GenieMat FFNP no bg

Design Guide

The Devil is in the Detail (and the execution)!

As with many products in the construction industry the devil is in the detail and the execution of that detail on site. Performance is directly tied to detailing and execution. 

Acoustic underlay is no different. If the acoustic underlay is detailed and executed correctly the risk of lower than expected performance due to the the acoustic underlay system is very low. 

PRODUCT PERFORMANCE
Layer of 15 mm engineered timber, to
GenieMat® FF03NP, to 200 mm thick concrete slab with 100 mm suspended ceiling cavity,
and 10 mm plasterboard ceiling.
L'nTw 44
dB
18 1
FIIC 66
Complies
with NCC Part F5.4
AAAC Rating:
5stars
Other tests available upon request
Layer of 15 mm engineered timber, to
GenieMat® FF05NP, to 200 mm thick concrete slab with 100 mm suspended ceiling cavity,
and 10 mm plasterboard ceiling.
L'nTw 43
dB
18
FIIC 66
Complies
with NCC Part F5.4
AAAC Rating:
5stars
Other tests available upon request
Layer of 4 mm LVT fooring, to GenieMat®
FF03NP, to 150 mm thick concrete slab with
150 mm suspended ceiling cavity, 89 mm
fberglass insulation and 15.9 mm plasterboard ceiling.
L'nTw 50
dB
18 2
IIC 60
Complies
with NCC Part F5.4
AAAC Rating:
3stars
Other tests available upon request
3stars

TIPS FOR DESIGNERS

What is GenieMat FFNP made from?

GenieMat FFNP has two ingredients, post consumer recycled content and a binder. Thats 94% recycled content!

Does GenieMat FFNP help towards certification?

Yes. This acoustic underlay is 94% recycled content so it will fit into green stars BREEAM MAT 03, or LEED, or ESTIDAMA. Get in touch with us to learn more.

Which GenieMat FFNP should I specify?

This all depends on your floor/ceiling build up and the targeted impact and airborne sound insulation performance. We have test data for a number of systems and will be able to help guide you to the right solution. Please contact James Bligh jbligh@pliteq.com to talk this through. 

What is the minimum screed depth required above GenieMat FFNP?

Provides specific guidance on the required screed depths for both bonded and unbounded screed. So we would recommend referring to this standard. 

Can GenieMat FFNP be used under screed and cement board?

Yes. On projects where wet trades are being avoided GenieMat FFNP can be installed directly under any type of board material. For further details please contact James Bligh jbligh@pliteq.com

What is the most important design detail?

The flanking perimeter isolation detail shown above is considered one of the most important details.

No matter how good your acoustic underlay is if there is no perimeter isolation or it is poorly installed this will significantly reduce the performance of the overall system. For more details on getting this detail right do reach out to us. 

Which projects has GenieMat FFNP been used on in the World?

GenieMat FFNP has been installed on many projects around the world stretching back to 2012. Please get in touch with Ramy El Kawkgi relkawkgi@pliteq.com for project references.

INSTALLATION
Guide For Under Screed

TIPS FOR CONTRACTORS

WHAT IS THE BEST ROLL JOINT INSTALLATION DETAIL FOR UNDER SCREED APPLICATIONS?

A butt or an overlap joint can be used. One detail is not necessarily better than the other but the overlap joint provides greater security at the joints of the rolls BUT it will consume slightly more material on site.

 

In both instances the joint needs to be taped securely to stop screed getting into the joints and causing an acoustic bridge.

Can GenieMat FFNP be stored outside?

We do not recommend it but yes. Assuming that it is covered GenieMat FFNP has a large operating temperature so should not be affected by heat or cold. 

Does GenieMat FFNP meet Approved Document F5 (Part F5)?

Yes. Pliteq has done extensive 3rd party testing on these products to ensure it complies with Part F5 standards.

Do I need to use perimeter isolation strip with GenieMat FFNP?

Yes! Perimeter isolation is integral to the performance of the acoustic underlay system. Flanking noise, as a result of no perimeter isolation is the most common reason for failure of both Pre Completion Tested and Robust Details systems.  

WHAT TYPE OF TAPE SHOULD I USE FOR THE JOINTS BETWEEN ROLLS FOR UNDER SCREED APPLICATIONS?

Any type of of cloth, duct, gaffa, carpet or single sided tape can be used. As it will be exposed to some moisture from the screed we do not recommend parcel or sellotape is used. 

Can GenieMat FFNP be used as a robust detail?

There is no Robust Detail associated with the GenieMat FFNP products but we have both laboratory and on site test data to show compliance specifications. For specific technical questions please contact Aedan Callaghan at acallaghan@pliteq.com

Can I buy GenieMat FFNP material direct FROM PLITEQ?

Yes. Our technical and sales team will provide you pricing and technical support, but in most cases we work with a network of local, regional, national and online distributors to get product to you in the most timely fashion.

 

If you have any questions on this or would like to be become a distributor please contact us.

New South Wales Distributor

3stars

Request
a Quote


Pliteq EchoOne Login